Back to top

A. G. Russell 4-5⁄8" Titanium Framelock

TELL A FRIEND
about this product

Item #: AGYH-FRD4

$114.95

Order Details

In Stock

Suggested Products

Check to add to cart:

Previous Next

I did not design this knife, but when one of our very best vendors offered us several of their designs as A. G. Russell™ exclusives, in premium materials, built with top notch craftsmanship, we jumped at the opportunity to offer them to our customers. These are really handmade knives. The execution is flawless. There are three models in this catalog. We have only 100 of each on our shelves as this catalog goes to press.

This 4-5⁄8" Titanium Framelock is a sleek EDC with a 3-5⁄8" hollow-ground drop point blade with a long swedge and a honest-to-goodness hand rubbed finish on 9Cr13CoMoV at 58-60 Rc. The blade rides on a ball bearing pivot. The combination of the ball bearing pivot and a flipper gives you a smooth and quick opening knife, and a strong ball detent creates a positive close and assures that the blade stays where it belongs when the knife is not in use. Jimping on the back of the blade increases your ability to control the knife while it is in use. The handles are Titanium with a hardened stainless steel lock face for durability. The tip down deep pocket clip and spacer are both Titanium. Measures 4-5⁄8" closed. Weighs 3.6 oz. Made in China.

  • Type
    Folder
  • Blade
    Drop Point
  • Blade Length
    3-5/8"
  • Blade Steel
    9Cr13CoMoV
  • Rockwell
    58-60
  • Lock
    Frame Lock
  • Handle
    Titanium
  • Closed Length
    4-5/8"
  • Clip
    Titanium Tip-down
  • Weight
    3.6 oz.
  • Origin
    China

A.G. Russell Knives

From the age of nine I made homemade knives until I was about twenty-four when I began to make handmade knives, crude but no longer made at home. A few years later, I had met and learned from makers like R.W. Loveless and R. L. Dozier. I made knives until the mid 1970s. I don’t make handmade knives anymore, as my hands aren’t what they used to be. However, I do have very talented makers in the United States and Japan who make knives that I am proud to put my name on. I design pocketknives, one hand knives, lockbacks, and fixed blade knives and have them made to our standards. ~A.G. Russell III

A.G. Russell has been in the knives and whetstones business for over 50 years. A.G. Russell knives are well known for their quality. A.G. Russell knives tend to be more traditional in style and look, with modern advances in material and design to create excellent knives.

$ 114.95 In Stock